Home Page

Index
Marking Bench Device




Visualized Tracing Unit



Marker: h 180 with Grooved Faceplate




h 180 Motorized Checking Unit

MARKING BENCH DEVICE WITH SHAFTS LOCK DEVICE AND WITH FINE CHECK ROTATION

Bench tool for marking; it is supplied upon checking its distance of 250 mm from the working table. Under the tool base there are 4 articulated bronze feet adjustable by means of dowels. Said feet make any adjustment possible in case the resting table is not perfectly parallel. It is fitted a 0 390 faceplate with T-shaped slits for various positionings. On the chuck flange there is a 360 rated ring with a counter-vernier which  enables reading precisions of 10'. The faceplate and chuck shaft is ground and fitted on  bronze bushing. Upon request it can be supplied with self-centering 200 dia, chuck of the best marks. It can also be equipped with stationary 0 300 or swinging 300x155 magnet plate.

 



  Art. 300

 

CHUCK MICROMETIC DEVICE

It is considered an optional item of the marking device. The fine rotation device can be easily unlocked for quick hand displacement  of shaft, and it can be switched on again for slow displacements, with 2' readings of the vernier.